Carrello

è vuoto

è vuoto
Disponibile

Shure Beta 56A Microfono Dinamico Con Pattern Polare Supercardioide, Completo Di Supporto Antishock Orientabile Per Rullante Tom

Spedizione gratuita per ordini superiori a 25,99€
172,17€ -52%

81,99€

1.Nomestile:Monte Girevole


Informazioni su questo articolo

  • Risposta in frequenza ottimizzata che conferisce a percussioni, strumenti amplificati e strumenti a fiato una qualità sonora da studio
  • Adattatore per asta incorporato, con sistema di bloccaggio dinamico e connettore XLR integrato, che semplifica l’installazione e consente una maggiore flessibilità
  • Pattern polare supercardioide uniforme, per garantire un elevato livello del guadagno prima del feedback e una reiezione superiore del suono fuori asse
  • Griglia in acciaio temprato resistente all’usura e alle sollecitazioni eccessive
  • Magnete al neodimio per un elevato rapporto segnale/rumore in uscita



Descrizione Prodotto

BETA56A
BETA56A

BETA56A

Dotato di una risposta in frequenza ottimizzata specificamente per percussioni e strumenti, ilmicrofono Shure BETA 56A offre un pattern di ripresa supercardioide estremamente uniformeche fornisce un elevato livello del guadagno prima del feedback eun’eccellente reiezione delrumore indesiderato.

  • Magnete al neodimio per un’uscita dall’elevato rapporto segnale/rumore
  • Avanzato sistema di isolamento pneumatico antishock che minimizza la trasmissione di rumori meccanici e vibrazioni

Microfono Shure BETA56A

BETA 56A MICROFONO PER RULLANTE/TOM

Microfono compatto per percussioni, progettato per il microfonaggio a distanza ravvicinata di rullanti e tom. Lo schema polare supercardioide offre il massimo isolamento dagli altri suoni sul palco.

  • Risposta in frequenza ottimizzata che conferisce a percussioni, strumenti amplificati e strumenti a fiato una qualità sonora da studio
  • Adattatore per asta incorporato, con sistema di bloccaggio dinamico e connettore XLR integrato, che semplifica l’installazione e consente una maggiore flessibilità
  • attern polare supercardioide uniforme per offrire un elevato livello del guadagno prima del feedback e una reiezione superiore dei suoni fuori asse
  • Design compatto che riduce il disordine sul palco
  • Gri glia in acciaio temprato resistente all’usura e alle sollecitazioni eccessive
  • Poco sensibile alle variazioni dell’impedenza di carico

BETA56A

BETA56A

BETA56A

BETA56A

BETA56A

Pattern polare. (Esempio 1)

BETA56A

Pattern polare. (Esempio 2)

BETA56A

Risposta in frequenza.


Ufuk YALÇINER
Recensito in Turchia il 23 aprile 2025
Ürünün kalitesini anlatmaya gerek yok.Satış sonrasında gösterilmiş olan özen, ulaştırılma hızı takdire şayan.Teşekkürler Shure-Türkiye, teşekkürler Amazaon-Türkiye. Korkusuz bir şekilde alışveriş yapabilirsiniz.
Customer
Recensito nel Regno Unito il 30 agosto 2024
There loads of options for vocal mics on Youtube and the internet but very few off this level of quality matched with the angled head design. I bought this mic so that I can provide some backing vocals while I play the kit. I had an issue with feedback from the other cheaper cardioid mic I was using, as I use a stage monitor that sits just underneath the mic. This Endine version of the Sure mic has super cardioid pattern so the feedback issues are hugely limited and if there is any feedback, you can point to the mic and blame the guitarist or the lead singer.Great mic - I'm loving it
MG1414
Recensito in Canada il 25 luglio 2024
You can’t go wrong with a microphone like this… This brand is one of the best !! Shure
アップロード
Recensito in Giappone il 2 dicembre 2013
重いのが難点でしょうか。タムにつけるは気が引けます。その他全く問題無し。必要に応じてチョイスできると思います。
R. S.
Recensito negli Stati Uniti il 12 dicembre 2010
I'm a drummer who does a lot of lead vocals in our band. I started out with a beta 58A and it does a great job, but the length of the mic plus the cable means I'm constantly hitting hit with my sticks and having to play around it to get to my toms. I've tried all sorts of headworm microphones and they have all been total failures - way too "live" and breathy, and none of them will stay on your head while you're drumming. I had given up and gone back to the beta 58A and was miserable, but less miserable than with the head mics.A few weeks ago I saw a drummer in a live performance on TV using what appeared to be a stubby mic with a right-angle bend in it. "Genius", I thought, and immediately set about trying to find it. I went to my local music store and the Pro Audio guy said it sounded like a Beta 56A "instrument mic". I was deflated. He said not to worry - the 56A is an excellent vocals mic, especially for higher-register male vocals. Since I'm often called the "Peter Cetera" of the group, I decided to give it a shot :)Finally - I am happy!! This mic is SO compact, and sounds great. It's probably a little flatter on the high frequencies than the 58A, but behind a drum kit that is a GOOD thing. I use a spring-arm mic holder mounted to my rack and with the length/weight of the 58A the mic would bounce around and bash me in the teeth/lips, but the 56A has less of a "lever action" being so compact and so the bounce has gone away. Also, I had to put the "wrong" angle on the 58A to keep the cord out of my way, but with the 90 degree connector on the 56A I can get it right up where I need it. On an overhead boom the cable goes *up* not *out*!OK, so not everyone is a drummer... again, as a vocal mic it is a maybe a little flat on the top end. Also, it is supercardiod which lets in a lot of rear sound - not so good for drums - but that is what a compressor is for.This mic is identical to the Beta 57A, but the 57A does not have the right angle body. I have been using a 57A to mic our guitarist's cabinet for my in-ear monitors and it sounds great, so I am sure that the 56A is also an excellent choice for mic'ing an electric guitar amp in addition to the "off-label" use as a vocal mic.It's a Shure, it sounds great, is built like a tank, is versatile, and affordable - what more could you want?

Potrebbe piacerti anche