davvero un ottimo prodotto sta in un palmo di mano e ha un semplice commutatore per ricezione e trasmissione Bluetooth. è ricaricabile e ha una presa fatta apposta per gli aerei a doppio jack si inserisce semplicemente nel suo cavo da 3,5 mm e il gioco è fatto.ma ovviamente non serve solo a quello: con il cavo e jack da 3,5 mm può prelevare il segnale audio e distribuirlo a un altro apparecchio ovviamente è possibile anche operazioni inversa ovvero Come ricevitore sempre sfruttando la tecnologia Bluetooth. impeccabile e con una buona qualità sonora Il raggio di azione è intorno ai 4-5 metri per avere una ricezione perfetta. provato in entrambe le situazioni come trasmissione e ricezione con ottimi risultati. tutto in un taschino.

Auf einem Transatlantikflug hatte ich ausreichend Gelegenheit, das Gerät zu testen. Es funktioniert ziemlich intuitiv: in die Gebrauchsanleitung musste ich gar nicht gucken, um meine AirPods Pro II damit zu koppeln.Ich habe mir mehrere Filme angesehen und dabei nicht nur die kabellose Freiheit genossen, sondern mich auch gefreut, dass die Geräuschunterdrückung der AirPods weiter funktioniert hat und ich bei Bedarf über den Druckpunkt an den Ohrstöpseln auch in den Transparenzmodus umschalten konnte.Skeptisch war ich, mit wie viel Verzögerung der Sender das Audiosignal wohl an die Ohrhörer schicken würde. Schließlich muss das analoge Signal erstmal digitalisiert und dann per Bluetooth durch die Luft geschickt werden. Mein Eindruck: Bei Dialogen merkt man die Verzögerung kaum. Nur bei Geräuschen wie dem Zuschlagen einer Tür merkt man, dass Bild und Ton nicht ganz synchron sind. Für mich hat das den Filmgenuss nicht beeinträchtigt.Wenn ich etwas zu kritisieren habe, dann dass dies wirklich eine gute Gelegenheit für einen Winkelstecker gewesen wäre. So hängt der Sender etwas traurig neben dem Flugzeugbildschirm und wenn der Sitznachbar oder die Sitznachbarin sich mal daran vorbeischiebt, besteht die Gefahr daran hängenzubleiben.

Trasmettitore che nasce per il collegamento ai device in aereo, ma che lo rende compatibile in molte altre applicazioni... dal pc di casa alla tv, o ad esempio i tablet durante un viaggio in compagnia per guardare video o film o ascoltare musica....visto che possono essere accoppiate 2 cuffie senza fili. Per il momento l'h testato in modalità trasmettitore e va benissimo...non ho ancora provato la modalità ricevitore che anche pare abbia. E' piccolo compatto leggero e trasportabile ovunque senza fastidi. Ce ne sono disponibili in diverse colorazioni. Il prezzo è nella media per questi prodotti.... Un articolo che posso consogliare senza riserva

Devo dire che questo è il ricevitore/trasmettitore bluetooth che ho apprezzato di più. Piccolo, pratico e comodo. Il fatto che abbia questo piccolo cavo AUX è una comodità incredibile quando si viaggia, soprattutto quando si prendono i lunghi voli intercontinentali, la batteria fa il suo dovere e non ti abbandona, poi devi letteralmente mettertelo in tasca e il gioco è fatto. Altra cosa che ho amato mi è capitato di andare in posti dove ci fossero vecchi stereo con l'ingresso aux e con questo articolo una volta inserito, magicamente potevo ascoltare la mia musica. Ottimo lo sto usando intensamente da quasi un mesetto e sono molto soddisfatto, lo consiglio pienamente.

Wir haben dieses Produkt im Rahmen des Amazon Vine-Programms kostenlos zum Testen erhalten. Selbstverständlich handelt es sich bei dem nachfolgenden Text dennoch um eine neutrale und ehrliche Bewertung.Zum Zeitpunkt dieser Rezension kostet der Nulaxy Bluetooth-Audio-Sender-Empfänger 21,99 Euro.Im Lieferumfang ist ein USB-A auf USB-C-Ladekabel enthalten sowie ein Adapter zum Anschließen zweier Audiogeräte. Die Bedienungsanleitung ist lediglich in englisch. Mit ein bißchen technischem Verständnis kommt man aber durch die gute Bebilderung klar. Ansonsten kann im Internet die deutsche Anleitung nachgelesen werden.Der Akku kann in ca. 2 Stunden aufgeladen werden. Im RX Modus verbraucht er etwas weniger als im TX Modus, er hält ungefähr 16-18 Stunden.Im Flugzeug war es bisher nicht möglich Bluetooth Kopfhörer an das Unterhaltungssystem anzuschließen. Mit diesem Nulaxy Audio-Sender-Empfänger klappt es jetzt. Er wird an dem Audioausgang eingesteckt und die Ohrhörer mit dem Nulaxy gekoppelt. Schon ist man verbunden.Dieser Bluetooth-Adapter ist aber fast überall einsetzbar. Er ist klein und handlich, so dass er auch immer mitgenommen werden kann. Das Preis-Leistungsverhältnis ist perfekt. Von daher gibt es eine Kaufempfehlung.

Adaptateur audio qui permet de transmettre et de recevoir, de basculer entre divers appareils. Compatible avec tablettes, ordinateurs, systèmes de diffusion de films et musiques dans les avions, équipements de salle de sport, TV et radios. Il prend en charge divers écouteurs Bluetooth dont les AirPods Pro. Jusqu'à quasiment 2 jours d'utilisation de la batterie. L'adaptateur Bluetooth couvre quasiment tous les besoins (maison, voiture, avion, loisirs). Existe en plusieurs coloris.

This is a fairly decent BT transceiver that can turn vintage wired speaker into a BT capable speaker provided that the speaker has 3.5mm input as well as providing an old TV (or projectors or even old computers) that doesn't have BT capability with the ability to use the latest BT speakers (again, provided that the TV or other devices DO have 3.5mm OUTPUT). This is particularly useful for [usually old] TV in the bedroom that doesn't have wireless functions where you don't wanna disturb the person next to you while enjoying a late night show or what have you.≡ Accessories* In-flight adapter (2-prong TS)* USB-C/A charging cable≡ Physical buildThe physical build quality seems decent and it has the typical all-plastic construction as most others. It has a typical MFB button and a slide switch (pic 9) to select the mode (Tx or Rx) you want it to operate in along with the usual charging port (USB-C) and a 3.5mm/TRS plug to connect it to the desired wired device. Unlike most others, this transceiver does have dual-device support and can be activated by double pressing the MFB button to pair with the 2nd device; nothing fancy here.✔ Btw, this particular mode includes an in-flight adapter (pic 2) which I do appreciate and this will absolutely change the in-flight entertainment experience since you can use ANY BT earbuds/headphones you desire. Simply plug the in-flight adapter into the appropriate audio ports on the plan, power the devices on, and off you go. The earbuds will be connected automatically to the transmitter if it's previously connected if not, just make sure this transceiver is in close proximity to the earbuds/earphones and they should be connected without issues.≡ Features* BT transmitter (TX) and receiver (RX)* Dual device support* SBC codec (this is the bare minimum)* Additional codec: aptX, aptX-LL**, aptX-HD, aptX-Adaptive, and AAC**** Note that aptX-LL is ONLY available in Tx mode and AAC is ONLY available in Rx mode.As aforementioned, this device can operate in one of the 2 modes and for those who aren't familiar with these, I'll briefly describe them.❶ Transmit modeThis mode allows THIS device to connect to other BT capable devices such as BT earbuds, headphones, or speakers wirelessly. This would allow, for instance, an old TV or even computer/laptop that's NOT BT capable to connect to a BT capable earbuds provided that the TV or the laptop does HAVE 3.5mm OUTPUT which will be connected to this device. In essence, TVs or laptops would connect to THIS device via 3.5mm ports (using standard TRS connector) and this device in transmit mode will in turn wirelessly connect to BT earbuds so you can use BT earbuds with TVs that aren't BT capable.❷ Receive modeThis mode allows THIS device to connect to other BT capable devices such as phones, tablets, or TVs wirelessly. This would allow, for instance, an old speakers, wired headphones, or even vehicle stereos that do NOT support BT to connect to BT capable devices such as phones or TVs provided that the old speakers or wired headphones do have 3.5mm INPUT which will be connected to this device. In essence, phones/TVs (BT capable) would connect to THIS device wirelessly via BT and this device will in turn connect to old speakers or wired headphones using standard TRS M/M connector (provided) so you can use old wired speakers that aren't BT capable with new TVs that have built-in BT functions.✘ NoteI should point out that this transceiver does NOT come with a noise filter (i.e. ground loop noise isolator/filter) and what this means is simply that if you were to use it (in either mode) while it's connected to the same power source (i.e. charging this device) that the other end of the 3.5mm cable also connects to, a high-frequency noise will be heard and it will (for me at least) render this unusable because the high-pitched noise is fairly prominent.For example, if this device is set in RECEIVE mode and it's connected via 3.5mm to a car stereo while it's also being charged via USB-C from the USB ports (whether it's built into the car or via cigarette socket), you will near a constant high frequency noise coming out of the vehicle's stereo. Again, this only happens when it's being powered by the vehicle AND connects to the vehicle via 3.5mm at the same time. If it's powered by, say, a separate portable power bank, then this wouldn't happen.Without going to unnecessary details, this is the result of, at least partially, the way electrical system is implemented in the cars and not entirely the fault of the transceiver although such filter (to isolate the noise) could've been built into the transceiver as well. In either case, just remember that if this device is connected to the same device via both (e.g. to a TV in transmit mode or a vehicle in receive mode) 3.5mm and USB-C at the same time, you will likely hear high frequency noise. A standalone noise filter is available for about $15 here if that's something you need or are interested.###≡ PerformanceSo how does it perform? Well, its performance is on par with most others with similar capabilities especially with regard to aptX-LL and aptX-HD codecs. There are quite a few BT transceivers available here on amazon but only relatively few of 'em actually offer support for aptX-LL, aptX-HD, or even aptX-Adaptive. It also supports AAC (pic 14) for those devices don't support aptX protocols.I have no easy way to actually measure the latency but the delay is minimal between the video and the audio as far as I'm concerned so that's pretty good (and expected of from aptX-LL). Strangely, aptX-Adaptive is not available (pic 13) during the test but perhaps my tablet doesn't actually support it. In any case, it does support aptX, aptX-LL, and aptX-HD without issues (pic 14). Overall, the performance is exactly as expected (similar to a few other aptX capable transceivers that I have as well) and that's good enough for me.✘ Note that the USB-A/C cable is ONLY for providing power to the adapter and it is NOT meant to be used as a USB device (i.e. plugged into a USB port into the computer) as it will ONLY be powered by the computer and NOT be recognized as a USB-compatible device. This is NOT an ordinary BT dongle/adapter that adds BT capability to a computer and let it connects to a BT speaker or headphones. This adapter ONLY converts FROM 3.5mm TO BT or FROM BT TO 3.5mm signals and that's all it does.≡ ValueThis is a fairly decent BT transceiver that's fairly compact/portable, easy to use, and well-performed; however, it does NOT come with a ground loop noise isolator/filter which limits its usefulness in some situations (i.e. when it's being charged) that may or may not be a deal breaker for some (read the note above). With that being said, it does come with an in-flight adapter that few others (ones with aptX codecs anyway) have. It's somewhat reasonably priced at $29 for what it provides and its overall build quality, features, versatility, and performance.

The Nulaxy Air in-Flight Bluetooth Wireless Audio Transmitter Receiver has several uses, one at home, one in a vehicle and another when taking an airplane.Receiver mode:Provides an easy way to send audio from a Bluetooth device (Smartphone, Tablet, Computer etc.) to non Bluetooth devices such as sound systems, portable speakers, TV’s etc. in your home, or car stereo system in your car, as long as you have a 3.5mm female phono input port on the device.For example, on a home sound system with no 3.5mm phono input port, use an adapter with RCA left/right male connectors to a 3.5mm female phono connector. Connect to the sound system input (AUX IN for example) and then connect the transmitter to the 3.5mm female connector. At home, this is what I do on my old analog sound system to stream music from my modern smartphone.In my van, I already have a 3.5mm phono input port (AUX IN), so this works perfectly to stream music from my smartphone to the audio system of the van.Transmitter mode:When traveling on a plane, I would prefer using my Bluetooth earbuds with noise canceling for audio when watching a movie on the airplane entertainment system, but this is not possible, as only wired headphones can be connected. This is now possible with this Nulaxy Air in-Flight Bluetooth Wireless Audio Transmitter Receiver, simply connect it to the 3.5mm audio out port of the airplane entertainment system and pair the earbuds with the device, and you are connected.- Simple RX/TX Mode switch to select Receiver or a Transmitter Mode- MFB button to turn on/off the device- Green Light in Transmitter Mode, will flash automatically until paired with Bluetooth earbuds or headphones, and will then turn to a solid green light while in use. Turn off the earbuds or headphones and device will flash green waiting to pair again- Blue light in Receiver Mode, will flash until paired with a smartphone, tablet computer or other Bluetooth device. When audio is played, it will play on the connected device using the 3.5mm connector (on a sound system for example). If Bluetooth is turned off, light will flash blue waiting for a Bluetooth connection.USB-C charging port- The builtin 250mAh rechargeable lithium battery, recharges in approximately 2 hours, and provides 20 hours in Receiver (RX) Mode and 15 hours in Transmitter (TX) Mode- USB-A to USB-C charging cable includedA quick, easy and very useful way to add Bluetooth audio out or audio in, depending on the need you have.

Questo ricevitore/trasmettitore è realizzato con materiali di qualità. Include un adattatore che si può usare in aereo, al quale si possono collegare due set di cuffie/auricolari Bluetooth insieme. Più o meno dura circa 20 ore prima di doverlo ricaricare. Si collega anche con altri apparecchi, come tv, radio