Regolatore pressione compressore componenti ausiliari pneumatici altri componenti ausiliari pneumatici pressione Valvola pressostato Regolatore collettore valvola

Boa qualidade

The quality of this assembly was a disgrace, lightweight metals, the worse part was the manifold, it was not even made of brass or steel but appeared to be a low grade cheap alloy. A lot of care had to be taken when screwing in the components otherwise the manifold threads could be stripped or the manifold would break , so the components had to be screwed in finger tight & a hardened sealant applied to the threads.Not sure if this assembly would stand up to compressor vibration or 100 psi pressure. I think this product may have come from China.

Lo primero que observe es que es no es metal, así que la única manera de fijarlo es con algún sellador de tuercas, al poner uno de los manómetros con fijador de tuercas y apretarlo con la mano corrí la rosca, increíble pero cierto... parecia mantequilla la aleación, muy mala...

Exactly as advertised great seller .

The metal part is made of an alloy of some kind.It is less brittle than the one it replaced, but still not particularly robust looking. It should last a long time if handled with care.The pressure gages are okay, and the pressure matches on both.The pressure switch is okay, but the power button is not as smooth as the unit it replaced. If set to turn off at 6.5 bar it restarts the compressor when the pressure drops to about 4 bar.This unit has a pressure release valve on each outlet, which is a nice touch, but they're not the best and the rubber seal came out of place after sliding it just a few times while pressurized, although it is a simple procedure to put it back. I recommend rotating while sliding it.Overall it is a good value, but would've like to get a slightly better unit for a little bit more money.

Molto scadente!