Worked to repair my Ridgid R8604242 propane heater. Should also work for the Ryobi propane heater since they are basically the same unit with a different battery connector. Thermocouple screwed right into the factory location. Signal wire coupled into the factory connector. Had to cut off the ground lead and just wrapped it around the ground screw, see photo. For another else doing this repair, two T15 screws are buried 5” into the unit. I found that a 3.5” T15 bit on a 6” extension fit into the hole. Glad to have my heater working again.

Tut was es soll

I like very much that it works fine with my heater.

ottimo

I couldn’t find anything that specified space heaters. This works excellent, plug-in to over heat module sensor.The propane gas fan tubes for heating big areas & workshops.

Ho usato questo prodotto per riparare una cannone stufa a gas da esterno, ho solo dovuto accorciare un capo del filo dove c'è il contatto faston e allungare l'atro capo con faston, e sostituire i faston da 6mm.Ha funzionato correttamente.

Usata per fungo esterno, ottimo

O dovuto fare una modifica per mattere due faston

Top en remplacement de celui d’origine fonctionne correctement je suis satisfait

Funziona bene