Asta Doccia Parete Colonna Doccia Acciaio Inossidabile SUS 304 con Supporto Doccino Regolabile Barra Saliscendi Bagno Spazzolato, F204-BS

The KES Shower Slide Bar is a sleek and sturdy addition to any bathroom. Made of SUS 304 stainless steel with a stylish matte black finish, it promises durability and elegance. The adjustable handheld shower holder is a practical feature, accommodating various heights and preferences with ease. Installation is straightforward, and the overall value for money is excellent. A very sturdy material too. A top-notch choice for a modern bathroom upgrade.

Es caro para lo que es además de see un producto chino, parece de calidad , si no se decolora o se estropea con el uso es un buen producto

Montage, Optik

We bought this because (for some reason) all our shower heads were installed way up high on the walls. Our little guy even at 11 years old could not reach the handheld, and at not quite 5'4" I didn't like where the head was. This allows us to adjust where the head goes for me and my kid. My husband said it was fairly easy to install, and it seems very sturdy and well-attached using the glue that it came with. Wish we'd gotten this years ago.

Lo stile bello

I am very happy with this item. It has considerable height adjustment. The shower head may be oriented in almost any direction, and at any height within the length of the rod. The shower head can also be rotated within the holder for better aim of spray. (Great for entry into the shower before water is warm.) Because of this precision of aim, I seldom hold the shower head in my hand. This is why I bought this item, and it works great.Very attractive/classy design.A push-button releases the sliding bracket, and automatically grabs the bar when the button is released after positioning. It appears that a spring-steel strip wedges against the bar to hold it in place. It seems to hold well regardless of orientation. However, I think the wedge would be more secure with the button on the top rather than on the bottom. This would cause the strip to force the holding strip tighter as more weight is applied - as compared to the button on the bottom where only spring pressure holds it in place. e.g. a cane out in front of you would hold better as you push forward, but of little use if pushing backward. Very strong hold both ways.The fit of the hose/adapter into the tapered hole in the holder may match better or worse according to shower head/hose design and brand. Verification of fit is recommended.Mounting - The brackets are screwed to the wall, then - as with most bathroom rods and fixtures - a notch at the top and a set screw in the bottom hold it in place. I am a little skeptical about this mounting: there is space between the chrome base inside and the round, cupped mounting bracket. I.e. if the set screw were a bit loose, it seems the base could move left or right to loosen the firmness of the mounting. Some filling in that space, like Spackle, putty, or even foam rubber, would prevent that possibility. I have not done that, and it is working great. (Of course, there are no little monkeys climbing up the rod to test its strength.)In my application, the bottom mount is onto the shower enclosure wall, and the other end is on the wall above the enclosure. Partly because of shower enclosure wall variation (top to bottom) and partly to provide desired height of shower head. I made a 3/4 inch thick, 3 inch diameter wood spacer to bring the top wall mount out to be plumb with the bottom mount; and, painted to match the wall. A bolt goes through the mounting bracket, the 3/4 inch spacer, the 1/2 inch drywall, and a 3/4 inch backing board with a washer and a nut. The nut is epoxied in place for future removal or reassembly. (The back wall was temporarily open for access from the utility room.)The 6 foot, high-quality, segmented chrome hose (loops down three feet) is almost as flexible as a string, and is great for use anywhere in the enclosure.

Ho dovuto sostituire la vecchia asta perché si è rotta.Ho scelto questa perché era l'unica che si adattava,come attacco,a quella già esistente.Contentissima dell'acquisto,il costo non è economicissimo ma la qualità è ottima.Rispetta le misure scritte.Magari bisogna aggiungere qualche specifica in più per essere sicuri che vada bene.