Carrello

è vuoto

è vuoto
Disponibile

AIYIMA T1PRO - Preamplificatore per Tubo Audio Domestico, Mini Ricevitore Bluetooth 5.1 QCC3040 APTX-HD Con Regolatori Sonori Bassi e Uscita Trigger

Spedizione gratuita per ordini superiori a 25,99€
93,99€ -61%

36,99€

Informazioni su questo articolo

  • Componenti di alta qualità: Questo preamplificatore valvolare utilizza 3 chip op amp e condensatori di accoppiamento giapponesi Ruby CBB di livello audiofilo ELNA, con un rapporto segnale/rumore fino a 110 db, prestazioni eccellenti e un'ottima qualità audio. Utilizzato con l'amplificatore A70 per realizzare un sistema audio HiFi.
  • Connessione multifunzionale: T1PRO supporta l'ingresso Bluetooth/RCA e l'uscita RCA/AUX OUT, che possono essere collegati a diffusori attivi, amplificatori e diffusori passivi, subwoofer attivi per creare un sistema audio. Inoltre, l'aggiunta dell'uscita trigger a 12 V consente di controllare l'amplificatore posteriore e di semplificare la commutazione.
  • Bluetooth 5.1: il preamplificatore T1PRO è dotato del chip QCC3040, che garantisce un'eccellente qualità del suono wireless e una bassa latenza e supporta i formati di codec aptX LL e aptX HD. Inoltre, è presente un pulsante di reset Bluetooth che cancella la funzione Bluetooth e impedisce ad altri di connettersi accidentalmente, migliorando così l'affidabilità della connessione.
  • Chiarezza del suono HiFi: con 6186 valvole a vuoto, le valvole elettroniche sfruttano appieno il loro potenziale, ammorbidendo il tono e rendendolo caldo e privo di rumori. È inoltre dotato di manopole per gli alti e i bassi, in modo da poter regolare il proprio stile di suono preferito, presentando alti nitidi, bassi e musica HiFi pastosa.Tubi sostituibili: 6J1, 6J2, GE5654, 6J3, 6J4, 6J5, 6*1N, 6AK5, ecc.
  • Compatibile con una varietà di chip op amp: È possibile sostituire il chip dell'amplificatore operazionale in base alle proprie preferenze, è possibile sostituire il chip dell'amplificatore operazionale: OPA2604, OPA2134, LM4562, JRC5532, ecc.
  • Otterrete: Preamplificatore valvolare AIYIMA T1PRO x1, manuale d'uso x1, valvola a vuoto 6186 x2, alimentatore da 12 V x1.



Descrizione prodotto

Chipset: 6186 (tubo americano) + QCC3040 + NE5532P
QCC3040 Bluetooth: Versione 5.1, supporta AAC, SBC, APTX, APTX-LL, APTX-HD
Modello di tubo: 6186,Tubi sostituibili: 6J1, 6J2, GE5654, 6J3, 6J4, 6J5, 6*1N, 6AK5, ecc.
Chip amplificatoreoperazionale Chip amplificatore operazionale: NE5532P*2
Chip op amp sostituibili: OPA2604, OPA2134, LM4562, JRC5532, ecc.
Condensatore: Utilizzare il condensatore di accoppiamento giapponese Ruby CBB
Distorsione: ≤0,23%
Gamma di risposta in frequenza 20hz-20khz (±1db)
Rapporto segnale/rumore: ≥110db
Regolazione degli alti/bassi: Gamma di regolazione degli alti/bassi: ±6db
Modalità di ingresso: RCA, Bluetooth
modalità di uscita: RCA/AUX OUT,Con trigger a 12 V
Dispositivi supportati: telefoni cellulari, tablet, computer, MP3, TV, ecc. Questo preamplificatore valvolare non supporta il phono.
Modalità di uscita: 1. Diffusori attivi 2. Amplificatore + altoparlanti passivi, 3. Subwoofer attivo
Alimentazione di lavoro: DC12V

Marek Polanski
Recensito in Giappone il 8 marzo 2025
As expected good quality !
marco
Recensito in Italia il 26 febbraio 2025
Ottimo pre abbinato a fosi V3
SunsetDancer
Recensito in Germania il 12 aprile 2025
Ich bin total begeistert von dem Vorverstärker!Die Audioqualität, die das Gerät liefert, ist wirklich hervorragend!Es ist bei meiner audiophilen Stereo-Anlage eine deutliche Verbesserung der Audioqualität, will sagen, sie ist deutlich hörbar!Und das schon nach ganz kurzer Einspielzeit der Röhren! Fantastisch!Ich lasse einen Internet-Tuner darüber laufen, angeschlossen über die Cinch-Buchsen.Der Sound läßt keine Wünsche offen.Klare, transparente, schöne Höhen, ausgewogene Mitten und ein kräftiger, aber dennoch samtweicher Baß.Sowas ist wohl wirklich nur mit Röhren-Technik erreichbar!Ich mag das Gerät und die Anlage gar nicht mehr ausschalten!Die BlueTooth-Funktion läuft bestens und auf Anhieb, und auch darüber ist hervorragende Audioqualität möglich.Ich habe schon einige YouTube Musik-Videos darüber laufen lassen. Wirklich sehr gut!Bei den Videos hängt natürlich alles davon ab, wie gut sie "aufgenommen" worden sind. Da gibt es schon erhebliche Qualitäts-Unterschiede in der Audio-Qualität.Aber wenn man ein hochwertiges Video laufen läßt, von einem guten bis mittleren Notebook z. B., hat man auch hier viel Freude an sehr guter Audio-Musik-Qualität, also über BlueTooth, wie gesagt.An die Übertragungs-Qualität mittels Cinch-Kabeln, reicht es (BlueTooth) natürlich nicht ganz ran.Das ganze, angenehm kleine, Gerät macht einen sehr hochwertigen Eindruck. Massiv-Metall-Gehäuse, feste, solide Drehregler für Bass, Höhen & Volume (Lautstärke).Solide, feste Cinch-Buchsen (RCA) auf der Rückseite, vergoldet - was will man mehr?Sehr gut ist auch die Wahlmöglichkeit mittels Kippschalter für direkt Quelle (neutral), oder man schaltet Bass & Höhen an/hinzu.Der Rauschabstand mit 110 dB ist hervorragend!Auch mittels Kippschalter wählt man entweder die Kabeleingänge (Cinch/RCA) oder Bluetooth.Das Gerät war vorbildlich & sicher verpackt, in zusätzlich neutralem Außen-Karton. Lieferung superschnell.Die Röhren sind superleicht einzustecken, sitzen sehr gut & fest.Gebrauchsanweisung benötigt man eigentlich nicht (dafür übernehme ich aber keine Haftung, haha...).Für diesen Preis eine ganz, ganz große Menge an AudioQualität, die sehr viel Freude bereitet!Ich hoffe natürlich, daß mir das kleine Wunder viele Jahre lang Freude schenkt!
faliqui
Recensito in Spagna il 6 settembre 2024
Es una locura que se pueda comprar un preamplificador con válvulas a este precio, solo por la estética ya merece la pena comprarlo para adornar tu sala de audio.Este preamplificador le da “ese puntito” que le falta a tu amplificador con algunas fuentes añadiendo más calidez al audio y sin meter ningún tipo de ruido. Además tiene BT 5.1, control de agudos/graves y el trigger necesario para que encienda otros equipos automáticamente.Lo aconsejo para cualquier fuente y especialmente por su conexión BT con soporte aptX LL y HD (imprescindibles para mantener la calidad de audio), cualquiera de los típicos aparatos que se usan para sincronizar audio por BT no tienen la misma calidad que este y si tienes un amplificador sin BT este preamp es un “must have”.Lo compré para usarlo con un A70 de la misma marca pero me ha gustado tanto que lo tengo junto a un Receptor AV Marantz antiguo que no tiene la posibilidad de conectar entradas BT.
Fire-Blade
Recensito nel Regno Unito il 27 agosto 2024
I have a pretty simple audio setup connected to my PC, consisting of a 6.1 creative surround sound speaker system for gaming, but also have the output connected to a cheap D class amplifier from Nobsound that cost me all of about £25 and hooked up to that are a pair of Mission M71 bookshelf speakers. For the price I paid, I have been well impressed with that little amplifier, but it doesn’t have any tone controls, so when offered the chance to test this little tube pre-amp, I was keen to give it a go.The T1 Pro is nice and compact at just 13cm x 11.5cm x 3.5cm (WxDxH) and with it’s all metal exterior, it feels really nice and solid.At the front you have 2 metal switches, with one being used to swap between power off, Bluetooth or RCA mode. The other lets you turn on the tone controls or to bypass them completely.You have 3 metal rotary knobs that are used to control bass, treble and volume – these all feel really nice to use with a smooth action that clicks into place as you turn them.On the top are 2 sockets for connecting the included tubes. These simply push into place and when powered on give off a nice blue glow.Around the back is where all of the connections are made, with an RF aerial socket, a reset hole for the Bluetooth connection, a pair of RCA inputs and RCA output, a 3.5mm AUX output, a 3.5mm 12v trigger to automatically switch on an amplifier and a 12v DC power socket.Finally, at the bottom are 4 nice silicone feet to stop the device from skating around your desk.***** In The Box *****1 x T1 Pro2 x 6186 Vacuum tubes1 x BT Antennae1 x 12v Mains Adapter1 x User Manual1 x AIYIMA Sticker***** Conclusion *****I will start off by saying that this is my first experience of using a tube pre-amp and the AIYIMA brand, so I have nothing to compare it against, but so far I am really impressed.The quality of the T1 Pro seems really good and I love that they have made the product customisable, by allowing the quick replacement of the OP amp chip and tubes.Having Bluetooth connectivity is a nice bonus, as you can quickly pair a smartphone for playback and I like that it supports the more efficient BT5.1 standard, along with support for AptX HD.Connecting the T1 Pro to my existing setup was really straight forward – I just needed to use a 3.5mm to RCA cable between the input ports and my PC and then an RCA to 3.5mm between the outputs and my Nobsound amp. This has given me the ability to adjust the bass and treble and has also given the sound a nicer, warmer tone. I have only used the pre-amp for around 15 hours so far, but I believe the sound will change as the time goes on and usually gets even better.I think the £79.99 asking price is pretty reasonable for what seems to be a good quality product and I shall look into swapping the cheap little Nobsound amp for the AIYIMA A70 to take advantage of the useful 12v trigger function.
Derrick Connell
Recensito in Canada il 16 novembre 2024
I love this pre amplifier, it looks sweet when it is powered up, Very easy to set up and install the audio tubes as they go in one way only, the build quality is excellent and is rugged and fairly heavy, it is small so it will take next to no space at all and it sounds awesome and the tone control is excellent, It functions flawlesly and gives a authentic tube amplifier sound and is very easy to use and functions as it should, And is a excellent value for every penny that I paid for it. I will definately recomend this pre amplifier to anyone for sure.👍👍👍👍⭐⭐⭐⭐⭐🤙😁🇨🇦

Potrebbe piacerti anche