Waveshare Nano Base Scheda per Raspberry Pi Compute Module 5 Lite/eMMC, CM5 Stesse Dimensioni, con CM5 Socket/40PIN GPIO Header/RJ45 Gigabit Eth/16PIN PCIe/HDMI/USB 3.2/Audio/MIPI Interfaccia ECC.

Overview
Nano Base Board (B) for Raspberry Pi Compute Module 5 Lite / eMMC Series Module, Same Size As The CM5, Suitable For Evaluating The Compute Module 5 or Being Integrated Into End Products
Specifications
CM5 socket-- Suitable for all variants of Compute Module 5
Networking-- Gigabit Ethernet RJ45 connector
Connector-- 40PIN GPIO interface × 1
USB-- USB 3.2 Gen1 Type A port × 1
MIPI-- MIPI 4-lane interface × 2 (22pin 0.5mm FPC connector)
Video-- Mini HDMI port × 1, supports 4K output
Audio-- USB audio 3.5mm jack
Storage-- TF card socket for Compute Module 5 Lite (without eMMC) variants
Power input-- DC 5V 5A
PCIe-- 16PIN PCIe connector (PCIe Gen2/3 x1)
Dimensions-- 55 × 41mm
Precautions
1. It is forbidden to unplug and unplug any device other than USB when it is charged
2. Type C can be used as a USB SLAVE interface to flash images
3. Onboard default USB 3.2 Gen1 port
4. The onboard BOOT button, you can press the BOOT button before powering on, and connect to the computer through Type C to let the device enter the flashing mode
5. Do not connect other devices when using Type C to flash. Insufficient power supply for burning will cause the device to be unrecognized
6. USB TYPE A interface maximum power output 2A
Package Content
CM5-NANO-B x1
2*20PIN color-coded straight pinheader x1
Development Resources
https://www.waveshare.com/wiki/CM5-NANO-B