Now thats its finally installed, it looks and works great. It took me a few attempts to finally figure out how to make it work however. DIFFICULT INSTALL WITH CRAP INSTRUCTIONSYou need to do the rough in with PEX type pipe as you will need some movement of the connection to the supplied braided flex line at the base. Look at the pictures and hopefully they help.YOU MUST connect the braided flex line to the tap first as this line does not have a rotatable/moveable end meaning the hose needs to be rotated/spun as part of this installation to the tap. If they could resolve this issue, it would make the install a hell of alot easier.Now tap is attached to flex lines, these need to be inserted into the mount bar, the square cover plate must be put onto the mount bar then the triangular mount bracket. Those flex lines need to be installed through the mount bracket (see picture). You will only have a couple of inches of extra play for these lines at that point but there is no other way to make it work.You can see how my PEX connections are essentially cut at floor level and the floor penetration hole for these (yes i broke the tile when i drilled for the mount bracket but this will not be seen because of the cover plate) is only a couple of inches wide. The mount bracket needs solid material for good attachment and the flex pipes have to run through the centre of the mount bracket. Make to sure to locate your floor penetration where the tap is going to be installed.Now that the mount bracket is installed, you simply thread the mount bar onto the mount bracket but move it far enough away from the wall so the square cover plate doesnt hit the wall when you rotate the mount bar like mine did. Yes I have to paint that area again.After installing, taking it all apart a couple of times due to the flex line to tap connection and other issues, it does work great but this tap is not for the faint of heart and the instructions are probably the worst I have ever seen. To figure out how to do it, I sat on the floor and put it together and as I stated, if I hadnt used PEX, I dont know if it would have been possible without the ability for the movement of the PEX and its ability to be pushed down into the floor cavity once the tap was installed.GOOD LUCK

J’adore pour le prix ça valait vraiment la peine sauf que la peinture sur le tuyau de la douche téléphone est en train de partir après moins d’un ans mais rendu là c’est pas grave versus le prix en magasin

Good quality, beautyfull

 

Muy bonita y de mucha calidad. Al ver reseñas dude y cuando llego note que la parte superior era muy pesada en comparación del tubo. Hice arreglos para fijarla mejor pero al final no fueron necesarios funcionó perfecto