Carrello

è vuoto

è vuoto
Disponibile

Riscaldatore a cartuccia MAXIWATT® - Elemento riscaldatore (Diametro: 12.5mm - Lunghezza: 80mm / 230V / 800W / 250TLS). Resistenza a cartuccia.

5.0/5
0 Commenti Scrivi Recensione
Spedizione gratuita per ordini superiori a 25,99€
23,92€ -54%

10,99€
  • Presentation: Cartridge Heater MAXIWATT(R), with more than 50 years of experience as a resistor manufacturer.
  • Certification: CE, ISO: 9001
  • Material: Stainless Steel 321, Nickel Rod, Fiberglass Cables.
  • Shipping: We ship your resistor within 24 hours for you to receive it, at the latest 48 hours after placing your order.
  • Utilities: Cartridge heaters are used in many applications, such as sealing bars, dip tank heating, hot melt adhesives, fluid heating, etc. If you have any questions, please do not hesitate to contact us.


Descrizione prodotto

Electrical resistance of maximum durability. Cartridge Heater with high compressed load.

Installation

  • Indicate with symbols the warning of hot surfaces.
  • Store as protected from moisture as possible.
  • Cut off the total current to the machine or mold.
  • Check that the machine or mould is at room temperature.
  • Introduction without any type of anti-seize paste.
  • Holes with H7 tolerance only
  • Attach regulation and cutting systems (thermocouples and regulators)
  • Insert 100% of the cartridge's sheath length.
Do not insert the connection cable inside the hole Protect the cables and connection input from: shocks, splashes and excess material . Do not pick up or carry the resistor on the cable. Keep the cable away from the heat source and protected from it. Do not repair damaged cables Replace them with new ones identical to the original ones. Indicate and send the working conditions (vibration, shocks, humid environments) in writing before accepting the order. Never leave in operation without qualified human presence. All exposed parts are compulsory for the safety of persons and goods. Never connect outdoors.

Avviso di sicurezza

⚠ Ficha de seguridad

  • Resistencias de cartucho de uso exclusivo en ambientes industriales .
  • Resistencia calefactora de alta concentración en W cm2 que desarrolla altas temperaturas.
  • Pueden ocurrir graves quemaduras si la piel hace contacto con partes del sistema de calentamiento.
  • El proceso de instalación de un cartucho implica el conocimiento experto y titulado por parte del instalador.
  • Es necesario utilizar lentes, guantes de seguridad y ropa adecuada a altas temperaturas.
  • Nunca debe conectarse al aire libre.


Potrebbe piacerti anche