è vuoto
è vuotoDescrizione prodotto
Customer Review
Recensito nel Regno Unito il 30 marzo 2025
I've just finished setting up a 10" rack and give this a go, normally in these smaller racks we'd just feed in the ethernet, terminate them and plug them directly into the switch as there doesn't tend to be a huge amount of cables. However in this case we had a couple pairs of fibre coming in with a 8 port ethernet switch going out. Using this 12 port patch panel made more sense as we've been able to manage the rack as you would a regular rack and we've been able to use standard fiber keystone jacks making it very easy to replace broken and protect existing fiber pulls.The 10" rack comes fully populated with RJ45 keystone, and an additional is included in the box. They are the standard ones so you can switch them out if you're feeling particularly picky about your brands or features. In our case, we swapped two out for fiber jacks. Loads of cable ties included as well so you'll be good to go.Ideally you want to mount this flush with the rack, it's only half height so does wobble a bit on a single rack nut, not that it's going anywhere and you won't notice if fully loaded with ethernet if you're using standard nuts. There is even a bit of wiggle room up and down.Overall, for a standard keystone patch panel, it's a nice bit of kit. It's fits exactly as you'd expect in a 10" rack, half height.
Nicolas
Recensito in Francia il 29 marzo 2025
Parfait pour une petite installation. Moi j'ai installé ça chez moi lors de ma construction.
Sebastian D.
Recensito in Germania il 24 aprile 2025
Ich bin sehr zufrieden mit dem Cat6 Patch Panel.Es ist perfekt für meinen Server-Rack und bietet eine stabile und schnelle Netzwerkverbindung. Die geraden RJ45-Stecker sorgen für eine einfache und sichere Verbindung der Kabel, und das Kabelmanagement-Rahmen hilft dabei, alles ordentlich und übersichtlich zu halten. Die Hochgeschwindigkeitsübertragung funktioniert einwandfrei, was für meine T1-Rackmount-Anwendungen sehr wichtig ist.Das Panel ist gut verarbeitet, passt genau in mein 25,4 cm Rack und ist eine zuverlässige Lösung für mein Netzwerk. Insgesamt kann ich dieses Patch Panel jedem empfehlen, der Wert auf Qualität und Ordnung legt!
Manuel
Recensito in Spagna il 15 aprile 2025
Nos encontramos con un panel de parcheo para cables ethernet cat6 de 12 puertos, es un panel diseñado para su instalación en un rack de tipo T1, con una distancia de 235mm entre agujeros de sujeción.El panel está construido en plástico y carece de apantallamiento, por lo que no está preparado para las conexiones del futuro.. es algo que no hubiera costado a penas poner (no hablo de un apantallamiento completo para cat7 y cat8, sino de uno más simple para cat 6e). Al carecer de ello se colarán más interferencias por los cables y dará igual si los ponemos blindados, además podremos tener problemas con conexiones de 10Gb/s o más, especialmente si debemos cubrir distancias largas.La calidad de construcción me parece correcta para lo que es, con una rigidez aceptable que no da una mala sensación.En definitiva, es un producto que en pleno 2025 no recomiendo pese a cumplir con lo prometido, pues debido a la carencia de apantallamiento nos vamos a ver limitados en el futuro y por algo más de dinero podemos adquirir uno apantallado
Topper
Recensito nel Regno Unito il 1 aprile 2025
Now, before buying - do make sure this is actually the size you require. 0.5U is not a standard size and not many racks or brackets cater to the sizing. These are normally best assigned to very small custom-built racks or test rigs.This one does seem well made and with no issues, however. No sharp edges or badly machined screws. Does precisely what I required for a small media rack I made at home.
Prodotti consigliati
Potrebbe piacerti anche